Overview
The XtremeAir Sbach 342 is a German high performance two-seat aerobatic and touring monoplane designed by Philipp Steinbach with Albert Mylius and built by XtremeAir GmbH of Hecklingen.
Features
  • Capable of both precise and extreme 3D aerobatics
  • Designed for compatibility with both GP and EP flight
  • Genuine Oracover covering
  • Bolt on two piece wing for easy transport and setup at the field
  • Removable canopy for easy change lipo battery and set up radio
  • Extremely lightweight laser cut all wood construction
  • Durable factory painted fiberglass cowl
  • Prepainted pilot figure, preinstalled in cockpit
  • All hardware included
Phoenix’s Sbach 342 is naturally slower but is engineered to perform equally thrilling manoeuvres! The scale-like model able to perform flat spin, knife edge and many other difficult aerobatics. The Sbach is expertly handcrafted from balsa and plywood using only epoxy and CA glues. You can fly this plane after few hours of installation. All the hardware are included (servo wire, fuel tank, wheel/landing gear, etc). You only need to separately purchase the nitro engine and radio system.
Wingspan
1663mm (65.5 in)
Length
1638mm (64.5 in)
Flying weight
4700-5200 gr
Wing area
56 dm2
Wing loading
85g/dm2
Wing type
Naca airfoils
Covering type
Genuine ORACOVER®
Gear type
Aluminum Hi-grade for main gear and spring wire for tail gear (included)
Spinner size
Plastic 70mm (included)
Radio
4 channel minimum (not included)
Servo
6 standard hitorque servo2 aileron; 2 elevator; 1 rudder; 1 throttle (not included)
Recommended receiver battery
4.8-6V / 1200-2000mAh NiMH (not included)
Servo mount
21mm x 42 mm
Propeller
suit with your engine
Engine
.120 / 2-stroke or .120/4-stroke glow engine (not included)
Motor
brushless outrunner 2000-2400 W, 450 KV (not included)
Experience level
Intermediate
Plane type
Scale Aerobatic
RECOMMENDED MOTOR AND BATTERY SET UP
 
Motor
RIMFIRE .120 (not included)
Lipo cell
6-12 cells / 4000 – 5500mAh (not included)
Esc
80-100A (not included)
Brand
Phoenix Models
SKU PHN-PH097
Brand Phoenix Model
Shipping Weight 5.0000kg

Be The First To Review This Product!

Help other Albury RC Models and Hobbies users shop smarter by writing reviews for products you have purchased.

Write a product review