Stabilised and load-balanced BEC supply for a high degree of safety in the servo and receiver power supply. Excellent for demanding large engine flying models, gliding models and helicopters. The conversion of your power supply from NiXx to 3S- 14S LiPo batteries is easy with the Super Servo S-BEC. The Hitec solution to supply servos directly with 5.2 / 6.0 / 6.8 / 7.4 or 8.4 Volt! A constant voltage and the high current of up to 15 amps ensure a significant performance plus a noticeable increase in the power of the servos. Where previously 5 or 6 cell NiCd or NiMH rechargeable batteries were used, now can be converted to LiPo. An elaborate and expensive battery switch can be omitted. The high current is safely fed into the receiver by two outputs, and the large heat sink keeps the unit cool even under severe conditions. A simple mounting of the Super Servo S-BEC is provided by the 4 mounting points. The output voltage of the S-BEC can be switched on / off via the safety switch included in the set, and the supercell LED installed there informs about the battery status and warns in good time if this is soon empty.

Input voltage
10V - 60V, 3S - 14S LiPo
Output current
10A , peak 15A
Output voltage
5.2V, 6.0V, 6.8V, 7.4V, 8, 4 V adjustable
SKU HRC118378
Brand Hitec RCD

Be The First To Review This Product!

Help other Albury RC Models and Hobbies users shop smarter by writing reviews for products you have purchased.

Write a product review