SIG Heat Shrinkable Koverall
THE BEST MODELS USE THE BEST COVERING

Dick Graham was an early user of Koverall and used it on his 1980 National Champion Piper Pawnee. Dick says: "Koverall produced excellent results on my 1/4-scale Pawnee. It is easy to apply, shrinks as required for uniform tightness, and the close weave takes dope without leaking through onto the inside."
Bob Wischer chose Koverall for this beautiful Aeronca K. The startling realistic appearance helped to capture first place honors in Giant Scale at the 1984 Reno Nats. Bob says: "It's tough material. A dent from impact can be removed, even after doping, with a bit of heat from a sealing iron set on low temperature. With silk, the dent would have been a hole, and a patch."

A light weight polyester based fabric that shrinks tight with heat. It has hight strength and is easy to apply. It accepts all common model paints like dope, enamel or epoxy and weighs 1.25oz per sq yd.

Koverall is a cloth covering of the type used on full-scale aircraft, but in a lighter weight (1-1/4 oz. per sq. yd.) for models. Koverall can be used on almost all R/C models large or small. Its superior strength and low price has made Koverall a real favorite with builders of giant size models. It's the most economical cloth covering you can buy! SIG Koverall is an uncoated, heat shrinkable plain fabric. It has no glue on it. To adhere Koverall to a model, you can either dope it on ala the traditional silk-and-dope method, or better yet, use SIG Stix-It heat activated covering adhesive (see below). Just brush a coat of Stix-It on the model framework, let it dry, then iron-on the Koverall just like you would a much more expensive iron-on fabric covering. Once the Koverall is stuck down around the edges, it can be shrunk perfectly tight with an iron or heat gun. Seal the Koverall with 1 - 2 coats of Sig Nitrate Clear Dope and then apply the finish of your choice.

Wingspan
1702 mm
Length
1298 mm
Wing area
49.09 sq dm
Approximate flying weight
4.22 kg
Flying skill level
Intermediate/Advanced
Recommended radio
6 - 9 channel radio and 8 standard servos
Recommended engine size
0.75 - 0.91 cu.in ---- 2 stroke.
0.91- 1.00 cu.in ---- 4 stroke.
SKU SIGKV002
Barcode # 614380573100
Brand SIG
Shipping Weight 0.0500kg

Be The First To Review This Product!

Help other Albury RC Models and Hobbies users shop smarter by writing reviews for products you have purchased.

Write a product review